http://videos.cctvcamerapros.com/support/ Security Camera & Surveillance System Support Forum en Thu, 29 Jul 2010 13:31:08 +0000 http://videos.cctvcamerapros.com/support/topic/geovision-ptz-controls#post-124 Thu, 08 Oct 2009 11:00:48 +0000 Mike 124@http://videos.cctvcamerapros.com/support/ <p>A customer contacted us with the following question regarding Geovision:</p> <p>I own a Sony EVI-DV-70 PTZ camera. I&#39;m looking for a new DVR CCA and am wondering if the software that accompanies the Geovision GV-600-4 will support the PTZ function?</p> <p>In order to control an analog PTZ camera using any Geovision DVR card, you also need to use a GV-COM or GV-NET accessory. The RS-485 or RS-232 communication cable is run to the <a href="http://www.cctvcamerapros.com/geovision-gv-com-p/gv-com.htm">Geovision GV-COM</a> or GV-NET. CCTV Camera Pros recommends the GV-COM because it is an external USB device and does not use up a port on your Geovision PC. Here are the instructions for both:</p> <p><a href="http://www.cctvcamerapros.com/Geovision-GV-COM-PTZ-s/163.htm" rel="nofollow">http://www.cctvcamerapros.com/Geovision-GV-COM-PTZ-s/163.htm</a></p> <p><a href="http://www.cctvcamerapros.com/Geovision-PTZ-Setup-s/153.htm" rel="nofollow">http://www.cctvcamerapros.com/Geovision-PTZ-Setup-s/153.htm</a></p> <p>Please let us know if you need anything else. </p>