Security Camera & Surveillance System Support Forum » Topic: Manual Focus and Zoom on Dome Camera http://videos.cctvcamerapros.com/support/ Security Camera & Surveillance System Support Forum en Sat, 11 Feb 2012 20:08:46 +0000 Mike Haldas on "Manual Focus and Zoom on Dome Camera" http://videos.cctvcamerapros.com/support/topic/manual-focus-and-zoom-on-dome-camera#post-177 Thu, 03 Dec 2009 07:42:37 +0000 Mike Haldas 177@http://videos.cctvcamerapros.com/support/

Philster,

Please let me know if the camera you are referring to was purchased from CCTV Camera Pros so that we can try to duplicate the issue and help you.

All of our dome CCTV cameras can be found here:
http://www.cctvcamerapros.com/Dome-Security-Cameras-s/22.htm

Thank You.
-Mike

Philster on "Manual Focus and Zoom on Dome Camera" http://videos.cctvcamerapros.com/support/topic/manual-focus-and-zoom-on-dome-camera#post-170 Tue, 24 Nov 2009 16:26:18 +0000 Philster 170@http://videos.cctvcamerapros.com/support/

I hope somebody can advise me. I have installed a new CCTV dome with manual focus and zoom which is adjusted by a small screw fitting either sied of the dome. This feature is not covered in the instructions though. Assuming this is fairly common set up deos anyone have advice as the picture I am receiving is very poor, blurred and milky and finely adjusting the screws causes loss of picture. Help! Please people !