accessible on OUTSIDE network, but home and office cannot connect to each other

Home > CCTV Security Camera & Video Surveillance System Forums > Remote Internet Viewing Setup > accessible on OUTSIDE network, but home and office cannot connect to each other

This topic contains 2 replies, has 0 voices, and was last updated by  Anonymous 3 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #31618

    Anonymous

    Hi All,

    2 of my DVRs with hostnames: are now accessible OUTSIDE the network, asked a few friends, they can access it.

    multiharvest.dyndns.org (HOUSE)

    -Prolink H5004n modem/router

    -DHCP at 192.168.1.100 to 254

    -dvr with static local IP at 192.168.1.100 using port 80 as web, port 9000 as media port

    -port 80 and 9000 are open

    multiharvest2.dyndns.org (OFFICE)

    -Prolink H5004n modem/router

    -DHCP at 192.168.1.100 to 254

    -dvr with static local IP at 192.168.1.200 using port 80 as web, port 9000 as media port

    -port 80 and 9000 are open

    : 1st and 2nd hostname are SAME ISP company, but different accounts and 4km away from each other.

    my problem is that, when I am in office, I cannot access my DVR at home and vice versa.

    I can access both DVR when I am in the computer shop or my friends house.

    Any help would be appreciated. Thanks!!

    #32498

    Mike Haldas
    Participant

    Those are internal IP addresses that begin with 192. Are those the addresses you are using to access remotely? What hostname are you using when you are able to connect from your friends house?

    #32499

    Anonymous

    I am using the ff. hostnames with public IP, which you can test as well and you will have a prompt of something plugin of the dvr needed to be installed.

    multiharvest.dyndns.org (112.202.149.96 ) (house)

    multiharvest2.dyndns.org (112.202.143.220 ) (office)

    What I am having problem is why my ISP here in the office cant open the hostname of my house and vice versa.

    Any browser I use shows timeout or not responding results.

    Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.