Can the Geovision Center V2 Display POS Information from Geovision DVRs?

Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > Can the Geovision Center V2 Display POS Information from Geovision DVRs?

This topic contains 0 replies, has 0 voices, and was last updated by  Mike Haldas 5 years, 6 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #31402

    Mike Haldas
    Participant

    A customer recently contacted CCTV Camera Pros and asked if the Geovision Center V2 software is able to receive the POS text overlay from a Geovision DVR that has a GV-Data Capture device connected to it that captures the point of sale data from a cash register.

    Unfortunately, the Geovision center V2 software is mainly designed to receive alarm signals from multiple Geovision DVRs / locations so it does not display the point of sale data, however it can capture any alarms that are programmed and triggered as the result of a point of sale event as well as capture alarm signals for any of the following additional scenarios:

    • Disk Full
    • Restarted Failed
    • Multicam Closed
    • Hard Drive Full
    • Multicam Surveillance System has been closed
    • An unexpected error occurred in Multicam
    • Surveillance System. (Error Code: 1 or 2)
    • Motion Detection
    • Object Missing Detection
    • Unattended Object
    • Alert Message of POS
    • Scene Change

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.