VIDEO LOST WATCHDOG PROCESS TRY TO REEBOT SYSTEM

Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > VIDEO LOST WATCHDOG PROCESS TRY TO REEBOT SYSTEM

This topic contains 2 replies, has 0 voices, and was last updated by  Anonymous 5 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #31288

    Anonymous

    I have installed the GV-1480A, we formatted the computer and have reinstalled the entire system of Geovision version 8.3, including Windows XP 32-bit with version 8.3 of geovision with the correct driver. error: "VIDEO LOST WATCHDOG PROCESS TRY TO REEBOT SYSTEM" anyway repeats.

    the application once you receive this message 10 seconds restarts.

    the system is installed on a dell vostro 220 computer model, we have two identical computers with the same number of systems installed and geovision not have this error.

    the system in the "Video Signal Diagnostic" only presents the option to "Disable Beep Video Lost."

    I appreciate your help.

    #32255

    JCHaldas
    Participant

    Hello Chonas,

    Please see the following PDF

    http://videos.cctvcamerapros.com/downloads/geovision/gvwatchdogreboot.pdf

    This should fix your issue.

    Thanks James

    #32256

    Anonymous

    Try this: (its on the manual)

    Stopping Video Lost Watchdog

    When the video signal is weak, the software watchdog will try to recover the lost video by restarting the system and even rebooting the computer. However, if the video lost watchdog feature is not required, now you have the option to disable it.

    To disable this feature, click the Configure button, point to Video Signal Diagnostic, and select Disable Video Signal Weak Watchdog.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.