D-Link Port Forward Setup

  1. Open your D-Link router's control panel by going to the IP address http://192.168.0.1/ in a web browser. You will be prompt for a password.  If you did not setup a password on your router, the dlink default password is usually blank.  Enter admin for the username and leave the password blank or enter your password.
  2. After you are logged into your router
    1. click on the "Advanced" tab (#1 below). The virtual server screen will open.

      D-link Port Forwarding
    2. Click the check box next to the first open virtual server entry and fill in the Name for this service.  This can be anything that you choose.  Also fill in the IP address of the device that you are setting up port forwarding for.
    3. Enter the port # that your IP camera uses in both the Private Port and Public Port fields.
    4. Select "TCP" for Protocol.
    5. Select "Always" for Schedule, and "Allow All" for Inbound Filter.
    6. Click Save Settings.
  3. On success, the screen will display a settings saved screen