1PC, 2 Capture Cards, 2 Monitors.

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #31576
    Anonymous
    Inactive

    I am looking to setup my 1 PC, with 2 monitors and 2 video capture cards, i can get one geovision program running on either monitor but what i need is to run run 2 geovision programs on the computer at the same time sending the video feed from the 2 video cards to 2 tv's (a total of 32 cameras)

    ** The computer is not hooked up to a network and will not have internet access

    ***Also to note I need to have both monitors displaying 16 cameras each, not one program displaying all 32 on one screen

    Can some one please help with this

    #32462
    Mike Haldas
    Keymaster

    Hello Gate,

    You will not be able to run two instances of the Multicam Software. However you can utilize the "Digital Matrix" within the GeoVision console. This will allow you to display 16 cameras on the main monitor and using the Digital Matrix you can display the remainder on the 2nd monitor.

    Here is a link to the GeoVision Manual — https://videos.cctvcamerapros.com/downloads/geovision/8.5.3_Manual.pdf

    Please refer to chapter 11.15 for the Digital Matrix

    If you have any questions please let me know.

    Thanks James

    #32463
    Anonymous
    Inactive

    ok that worked but it is only displaying the first 16 cameras on both screens, i need to display 17-32 on the second monitor, but when i hook up 17-32 it cross feeds to the first 16 cameras and it distorts the images

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.