NUUO Auto PTZ Patrol Support

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #30969
    Mike Haldas
    Keymaster

    A customer recently contacted us to ask if their IP based PTZ camera could be configured by the NUUO software to go on an auto patrol where is would continuously go to preset locations over and over. Their camera does not support this, so they want to use the NUUO software to program the auto patrol function.

    NUUO support responded that this was supported by configuring the preset points within the NUUO surveillance software by following these steps:

    In NUUO software, we have a function named patrol which can make the PTZ camera to scan the preset points in period of time.

    1. On the main console screen, there is a preset panel. Click on SET button to add preset point that you want. Repeat this step to add all presets.
    2. Open patrol panel to set up patrol group by clicking on the patrol button on the main console
    3. Click on PATROL panel to start patrol function

    Please post a reply to this forum thread if you have any questions.

    Thanks.

    -Mike

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.