Vivotek VS7100 Video Server iCamViewer iPhone App Setup

This topic is empty.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
March 11, 2010 at 4:05 am #31053
Mike Haldas
Keymaster
A customer emailed us with the following question related to our iCamViewer surveillance camera iphone app:

I got the VS7100 along with the Icamviewer app on my iphone. I can't seem to get this to work – is there additional setup instruction available?

Here is the answer:

In order for the Vivotek VS7100 network video server to work with the iCamViewer app, you must set the 1st video stream to MJPEG, by doing the following.
1. From a web browser login to you VS7100
2. Click on the Configuration link on the left side of the screen
3. Then click on the audio & video link on the left
4. On the Audio & video settings screen set the mode to JPEG for the first stream as seen below:
Note: you can still use set the 2nd stream to MPEG if you want to record MPEG video on your NVR.
January 9, 2012 at 2:35 pm #32010

Anonymous
Inactive

This helped so now I am able to stream to the app in my homenetwork using port 554.

But how to setup port forwarding in my router to access from "outside" I have port 554 forwarded which have worked before using mobile phones but seems not enough for the iPhone app.

And what about "Authentication" in the VS7100 setup?

January 10, 2012 at 6:40 pm #32011

Anonymous
Inactive

I told that this setup above helped but that whas not the case.

It seems that connecting to port 80 and 554 works and gives motion video for about 5 seconds and the disconnects.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.