Connecting to a 4 channel power box

This topic is empty.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
January 19, 2013 at 9:28 pm #31557

Anonymous
Inactive

I have a four camera surveillance system. Each camera is powered by its own power adapter that is connected to each camera via the connecting cable �four cables and four 12 volt AC/DC adapters�what I�d like to do is buy a four channel power supply box so that I can connect all four cameras to a single power supply. My question is, is there any kind of adapter that would allow me to use the cables that I�m presently using and connect them to the multi-channel power supply without having to cut and strip the end of cable that connect to each power adaptor. As you know each cable comes with a male plug that connects into power adapter�s female connector. I do hope you understand my question. What do you recommend or suggest to accomplish this?.

Thank you all

January 21, 2013 at 12:32 pm #32449

Mike Haldas
Keymaster

Manny,

Yes, it is possible to use a multi-camera power supply box with pre-made Siamese coax cable that already has the male power plug end attached. You can simply attach PT-3 female power lead to the end of your existing cable.

[img]https://a248.e.akamai.net/origin-cdn.volusion.com/not95.tcan2/v/vspfiles/photos/PT-3-1.jpg?1334944840[/img]

This turns the 2.1mm plug into a positive and negative cable lead that can attach to the screw terminals of a power supply box for your security cameras.

Please let me know if you have additional questions about this.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.