Re: Start scan remotely for PTZ camera

Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > Start scan remotely for PTZ camera > Re: Start scan remotely for PTZ camera

October 5, 2011 at 1:56 pm #32293
Mike Haldas
Keymaster

Hello irishcrows,

If you are needing to log into the OSD menu of the camera. Most PTZ cameras are programmed with the preset of 95 to access the OSD menu by default. So using the GeoVision Virtual PTZ control call out to preset 95.

To Access the Virtual PTZ interface click the following button see below image.

DMMultiview_PTZ.jpg

Now select Preset 95.

DMMultiview_PTZ_Preset.jpg

I hope this helps.

Thanks James