ITS Project for 25 CCTV Pole Cameras Home > CCTV Security Camera & Video Surveillance System Forums > IP Camera Support > ITS Project for 25 CCTV Pole Cameras This topic contains 3 replies, has 0 voices, and was last updated by Anonymous 7 years, 8 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts March 8, 2012 at 10:40 am #31438 Anonymous Hi, we are using viconnet nvr and viewwe for 9 cctv cameras but now our company is adding 25 more cameras to same network. Can anybody share with me information that is existing nvr can work on this or we have to change the nvr.which company cameras and nvr is suitable or support 35 or more cameras at same time? March 19, 2012 at 7:56 pm #32351 Mike HaldasKeymaster Hello Rahi393, For large applications that are going to be using more than 16 cameras, I ould reccommend our GeoVision or NUUO PC based DVR / NVR's Either system will support up to 32 cameras on a single DVR / NVR. Please let me know if you have any questions. March 21, 2012 at 3:14 pm #32352 Anonymous Thanks buddy for you kind reply. Kindly tell me which ptp or ptmp device is capable to work these cameras load smoothly. Main site distance from all cameras position is almost 20km. March 21, 2012 at 7:20 pm #32353 Mike HaldasKeymaster Hello Rahi, Unfortunately we do not carry anything that will transmit farther than 5 miles. Here is some info our wireless system that would allow for video transmission up to 5 miles https://www.cctvcamerapros.com/Wireless-Camera-System-p/wifi-nan72b.htm Please let me know if you have any further questions. Thanks James Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.