How do I set up the monitor to show only few cameras?

Home > CCTV Security Camera & Video Surveillance System Forums > CCTV Security Camera Support > How do I set up the monitor to show only few cameras?

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 28, 2011 at 4:40 pm #31228
    Anonymous
    Inactive

    I have a 16 camera system But I am only using 8 cameras. On my screen it showas 8 pictures and 8 blank chanels. How can i delete the blank channel and only see 8 actual cameras.

    March 28, 2011 at 8:04 pm #32183
    Mike Haldas
    Keymaster

    Hello Renny,

    It depends on the DVR. Some DVRs may not have this feature. But typically it is available. You should be able to change the grid format to only display the 8 cameras. Or available with some DVRs there is a setting to enable or disable certain channels.

    I hope this helps

    Thanks James

    March 30, 2011 at 12:07 am #32184
    Anonymous
    Inactive

    How do I change the grid format? where do i find that?

    March 30, 2011 at 7:09 pm #32185
    Mike Haldas
    Keymaster

    Renny,

    It depends on the DVR. Do you have the model # of the DVR?

    July 30, 2011 at 1:38 am #32186
    Anonymous
    Inactive

    Oh,yes,I think so.

    January 29, 2012 at 1:54 am #32187
    Anonymous
    Inactive

    It all depends on your DVR. If it can support such kind of functions, then you can find it in the menu. It is a good idea to try to enable or disable certain channels.

    May 14, 2012 at 9:02 am #32188
    Anonymous
    Inactive

    The key lies in the DVR.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.