H 264 DVR local network login failed
- This topic is empty.
-
Posts
-
Hi, I have the same problem with Jasons,
When I try to view the DVR through local network. run \192.168.1.10 , thes creen comes with login interface
user name:
pass word:
command port: 5050
I tried user name ADMIN/admin, password:111111 as the user name and password when I first login to set up the DVR.
The Promt window come up with message "Login failed"
Could someone please help me. I was stuck.
Please.
If your password is not working, most DVRs have an override password reset or master password that enables you to login to the DVR to reset the password. For example, here is a link to a page that shows you how to reset your password on iDVR-PRO CCTV DVRs.
https://www.cctvcamerapros.com/iDVR-PRO-Password-Reset-Instructions-s/895.htm
At this point, I would recommend doing that if you can find the instructions specific for your model DVR.
HI CAN SOMEONE PLEASE HELP!!!
purchased and installed a 16 h.264 dvr and very much able to log in within the network. however i can't manage to log in outside the network. i am minutes away from throwing this halfway across the world… ps. should have stock to digimerge maybe? or is it my configurations? please help thank you
Hello Area51,
Please NOTE: H.264 is not a DVR model it is a compression that almost every DVR on the market currently uses.
If you are not able to remotely view the DVR,it is most likely because you have not forwarded the ports for the DVR.
You will need to figure out what port the DVR is running on (you can typically find this in the network menu of the DVR). Once you have the port you will need to log into your router and forward that port.
If the DVR was purchased through us we will have instructions in our support and knowledge base — https://www.cctvcamerapros.com/Surveillance-Knowledge-Base-s/57.htm
Please let me know if you have any questions.
Thanks James
- You must be logged in to reply to this topic.
