Can you cut the BNC connectors off premade CCTV Cables and re-attach them?

A customer contacted CCTV Camera Pros with the following question related to CCTV cables:

I have a small hole drilled in the brick that leads to the dvr in my living room. If I run your CCTV cable, can I cut the 3 connectors off of the end so I will be able to re-connect them again on other side after I feed the cable through the wall?

CCTV Camera Pros provided the following support:

If you are using [url=ttp://www.cctvcamerapros.com/CCTV-Security-Camera-Cables-s/258.htm]pre-made CCTV cables[/url] like the ones on the link below, then you can not cut the connector ends off and replace them.

https://www.cctvcamerapros.com/CCTV-Security-Camera-Cables-s/258.htm

You should use RG59 siamese cable which is made so that you can attach connectors after you run and cut the cable to your exact length desired:

https://www.cctvcamerapros.com/RG59-Siamese-CCTV-Cable-s/259.htm

You can see how to connect BNC crimp on connectors to RG59 cable in this video.

https://www.cctvcamerapros.com/RG59-Siamese-CCTV-Cable-s/259.htm#how-to-connect-bnc

Please let us know if we can help further.