Re: DVR iPhone Setup

pops,

Although I am not familiar with E-Vision DVRs, the process generally the same for all DVRs.

1) You need to figure out the port that your DVR is running on. Typically, you can access a network settings screen on your DVR that will tell you this.

2) You need to setup port forwarding on your router for this port so that you can access your DVR remotely over the Internet.

3) You need to program the correct settings into the iPhone app so that you can access the DVR.

Take a look at the iPhone and iPad app instructions for CCTV Camera Pros iDVR. Use these steps and concepts to guide you on your DVR as much as possible.

https://www.cctvcamerapros.com/DVR-Remote-Access-iPhone-iPad-App-s/478.htm

I hope this helps.