Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > Geovision iPhone Application GV-iView > Re: Geovision iPhone Application GV-iView
Gentlemen, First of all I want to thank every one of your posts and inputs on these pages or I would never have been even able to make it to this point, whereever I am.? Could I please ask why ( and I am sure you folks have covered it but like a few folks that wrote above that there minds were exhausted..). Why is that you can input all the data correctly that you have recommended and that works, believe me on my home network. Had it not been for your efforts I would never have got it to look at the cams on this home network. Minus the remote playback. Believe me after all it took me see cameras with your help I am grateful. Now if I could just get it to work outside an away from my home network. I have cut the network on the iphone off to see if that would help. I have changed ips to the wan ip then : and then the local geo ip and even with a port number at the end and it just dont want to hook up. If anyone has time to help an old hippie I would be eternally grateful.