Re: iphone surveillance viewing using Geovision GV-iView app

Mike Haldas

Hello Chucky,

If you have two separate GeoVision DVR's on the same network you must change the http port so they are different as well. By deafault the GeoVisions http port is set to 80. On one of the machines you will need to change it to something different like 81. Once you do this , in the GV-iVIEW App you will need to type in the ip address:81 for the port number. Also in the port field below type in the Mobile port 8866 or 8867 depending on the DVR.

I hope this helps.

Thanks James