Re: Mpeg4 9ch setup Need help

#31823
Mike Haldas
Keymaster

Greg,

Start by verifying the following:

  • What port # is your DVR using? Make sure that you add the port number to the end of the URL like this: https://192.168.1.104:8000 for example if your DVR uses port 8000.
  • If your DVR is using port 80, you may want to change it.
  • Are you sure that your DVR supports remote access through the IE web browser? Some DVRs do and some do not. Some DVRs use a client application that comes with the DVR that you must install

Although I do not think that you are using one of the DVRs that CCTV Camera Pros supplies, you can take a look at the instructions for some of our units and improvise a bit for your. Please see these two links:

https://www.cctvcamerapros.com/DVR-Viewer-Connection-s/227.htm

https://www.cctvcamerapros.com/Geovision-WebCam-Server-Setup-s/124.htm

Please let me know if we can help further.

Thanks.

-Mike