Geovision App only shows one camera

This topic is empty.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
July 31, 2012 at 12:51 pm #31481

Anonymous
Inactive

I have a geovision DVR setup with 3 IP cameras. If i login using the Geovision iphone app, i only get one of the three cameras and then it will disconnect. I can connect to the machine with an android phone and see all 3 cameras with no problems. Ideas?

August 30, 2012 at 6:14 pm #32385

Mike Haldas
Keymaster

Kurt,

Sorry to hear you are having trouble. That is a strange case that you described. I have not run into that issue here ever.

If you want to double check the setup to be sure, please refer to these instructions:

https://www.cctvcamerapros.com/Geovision-iPhone-Application-GV-iView-Setup-s/329.htm

There is also a long running forum thread with many posts related to troubel shooting Geovision iPhone access and setup with the GV-iView app here:

https://videos.cctvcamerapros.com/support/topic/geovision-iphone-application-gv-iview-support
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.