Geovision DMmultiview Software for Remote Monitoring Multiple Geovision Systems

Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > Geovision DMmultiview Software for Remote Monitoring Multiple Geovision Systems

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 22, 2011 at 5:02 pm #31330
    Mike Haldas
    Keymaster

    A customer contacted CCTV Camera Pros today and wanted to know how to connect and remotely monitor / view two different Geovision surveillance systems from one central computer screen.

    Fortunately, Geovision software includes DMmultiview which allows you to connect to mutlple Geovision DVRs and NVRs and watch up to 32 cameras on one screen. There are mutliple ways to download and install the DMmultiview software. This document describes the different ways to install DMmultiview and how to setup the software up to connect to multiple locations.

    Geovision DMmultiview software manual

    Here is a link to download the software:

    Geovision DMmultiview Software

    May 2, 2013 at 3:23 am #32287
    Anonymous
    Inactive

    where can I down load the ViewLog componets for the dmmultview ver 8.5 and how do I use the softer ware with the DMmultview

    Thank You

    Brian Palmer

    May 17, 2013 at 8:45 pm #32288
    Mike Haldas
    Keymaster

    Brian,

    Many Geovision software downloads can be found here:

    https://www.usavisionsys.com/forums/index.php

    If you do not see it there, please request it through the distributor that you purchased from.

    Thanks.

    -Mike

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.