Geovision DVR / NVR System Idle Protection Setup

Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > Geovision DVR / NVR System Idle Protection Setup

Viewing 1 post (of 1 total)
  • Author
  • #34282
    Mike Haldas

    We recently had a customer who came to us looking for a solution to the following issue: 

    “I am looking for a way to have the system automatically Logout, switch to Single Camera View, and go to Full Screen. I have a couple of machines that do this, but can’t replicate the results. I have just taken over several Geovision Analog Systems and hope that you can solve this, as this is what the customer wants.”

    Here was our response:

    Thank you for contacting CCTV Camera Pros!


    Please see the below instructions.


    1. Enable system Idle protection > Check the “Auto Logout or Switch to Startup Login User if Available” See below reference images.




    2. Go to the start up settings



    3. Check the “Startup Auto Login” box > Click Green arrow > input desired user and pw to be logged in > Check “Auto Login in Fullscreen Mode” box



    4. Check the ” Default Screen Division” box > Click the green arrow and select “1 Channel “


Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.