Multicam Surveillance System 8.53 (screen gap) Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > Multicam Surveillance System 8.53 (screen gap) This topic contains 3 replies, has 0 voices, and was last updated by Anonymous 6 years, 3 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts October 11, 2012 at 8:53 pm #31514 Anonymous egoriy, Can you please repost your images resized to no larger that 575 pixels in width? Thanks. -Mike April 18, 2013 at 3:59 pm #32416 Anonymous Hi. I have a Geovision GV-FE520 360 camera which was working just fine for weeks but now there is a gap on the screen appeared and I tried changing all the settings but nothing helps (even on a full screen mode). Please help. April 22, 2013 at 7:35 pm #32417 Mike HaldasKeymaster Hello egoriy, If you have not done so already i would recommend that you update the GeoVision NVR software as well as the cameras Firmware. You can download the latest camera firmware here — http://www.geovision.com.tw/english/5_3.asp Also you can request the latest NVV Software here — http://www.usavisionsys.com/forums/viewtopic.php?f=9&t=26 I hope this helps. Please let me know if this does not fix the issue. Thanks James April 22, 2013 at 9:42 pm #32418 Mike HaldasKeymaster Also if the last post does not help, please try pressing the + button on your keyboard. Please let me know if you have any questions. Thanks James Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.