Second Display can show all camera's, Primary Display only can show 1 camera Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > Second Display can show all camera's, Primary Display only can show 1 camera This topic contains 0 replies, has 0 voices, and was last updated by Anonymous 7 years, 9 months ago. Viewing 1 post (of 1 total) Author Posts February 28, 2012 at 3:32 pm #31432 Anonymous Our GeoVision system seems to have and issue. We have two monitors, we are running version 8.3. We currently have 8 channels we are using. We can view all cameras live in camera setup (system configuration). On the main video screen (Display 1), Only Camera 4 shows a live view all the other cameras just show geovision logo. The second screen (Display 2) can show all cameras in any order per the "Digital Matrix Setup". Why can we adjust what we are viewing in display 2, but the primary display seems to be locked onto camera 4. None of the other cameras can be viewed on display 1. Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.