Storage of Geovision Multicam Surveillance System Installed path not enough

Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > Storage of Geovision Multicam Surveillance System Installed path not enough

This topic contains 0 replies, has 0 voices, and was last updated by  Mike Haldas 9 years, 5 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #31032

    Mike Haldas
    Keymaster

    We recently had a customer who was receiving this error message upon start up of the GeoVision Multicam Software: Storage of Multicam Surveillance System Installed path not enough Free Space Above 50MB.

    Solution1: Install the Geovision Multicam Software onto a disk with more than 50MB of free space.If this does not help please follow steps of solution 2.

    Solution2: Check If the hard drive you are using for the direct path is compressed. To check Start > Computer > right click (C:)> Properties > General > Make sure the Compress this Drive to save disk space is unchecked. After this is done and the GeoVision is still giving the error. Make sure the disk is not compressed and uninstall the GeoVision Software and reinstall.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.