Wire Repair and what connector ?

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #31286

    I was given a ( Smart Home ) camera Infrared LED Model LIR-542A1 ( 4~9mm ) power DC 12V 900mA I have looked al over the net for the model to no avail .. the camera has no connectors, wire was broken about 2 ft from cam, it has red, yellow, and what looks to be a ground bare copper wire .. unless that would be the video wire ?

    Id like to test the camera to see if it works… what connectors do I need and obviously I need a power 12v DC 900mA supply.

    Anyone here no what wire does what and what connectors and how should I connect the camera to a computer or tv prefer computer .. video capture card ?

    Thanx in advance


    Mike Haldas


    In our experience, it is very difficult to repair a CCTV camera that has a broken cable lead because most of the time the cable is soldered to the circuit board of the camera by machine and the connections are too small to do by hand if you wanted to try to replace it. ON the other hand, it can also be difficult to figure out how the internal wiring is done on the lead to repair it. Most of the time, we replace cameras that are in the state that you are describing. I am sorry that I do not have better news for you. Please let us know if we can help further.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.