JPEG2000 16 Channel RD DVR message NO HDD Detected

Home > CCTV Security Camera & Video Surveillance System Forums > JPEG2000 DVR Support > JPEG2000 16 Channel RD DVR message NO HDD Detected

This topic contains 1 reply, has 2 voices, and was last updated by  Mike Haldas 3 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #32666

    Anonymous

    Hi I was wondering if anybody could help me I have a JPEG2000 16 channel model RD DVR. I’ve had the DVR for a number of years
    but all of sudden its coming up with message NO HDD Detected I’ve tried setting the DVR back to factory default & cleared all the information on the hard drive. The DVR won’t even recognise the HDD when you the view the HDD Information I’ve tried unplugging the leads and reinserting and also powering down the DVR. Maybe its just the hard drives gone faulty but I’m just looking for the best solution to fix this problem & to prove its the hard drive that’s faulty?

    #32667

    Mike Haldas
    Key Master

    Dillon,

    Disconnect the hard drive from the DVR, then boot it up with the HDD disconnected. If there are no errors when booting without a hard drive, then the hard drive is most likely the problem and just needs to be replaced.

    Let us know if we can help further.

    Sincerely.
    -Mike

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.