How to make the matrix pop up on specific monitor?

Home > CCTV Security Camera & Video Surveillance System Forums > Geovision Surveillance Support > How to make the matrix pop up on specific monitor?

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 13, 2011 at 8:09 pm #31208
    Anonymous
    Inactive

    Hi guys, I just added 3 monitors to the computer I'm using and added 3 remote servers to the command center, I'm trying to make the screens go to the new monitors when I start the system but instead they pop up on top of each other. I also tried changing the matrix for each server but it didn't work.

    I'm using version 8.3.3.0

    Thank you.

    February 14, 2011 at 8:58 pm #32152
    Mike Haldas
    Keymaster

    Hello Phillippe,

    I have listed below the setup instructions for the GeoVision Digital Matrix.

    Once the Monitors are active you can set different live views and screen divisions for each monitor.

    1. On the main screen, click Configure, click Accessories, and select Digital Matrix Setting.

    2. Use the Display list to select the monitor to be configured.

    3. Select Screen Division.

    4. Drag and drop the camera numbers to the desired positions on the divisions. To clear the

    assignment, drag and drop the “C” icon to that position.

    5. Select Live Mode.

    6. Repeat above steps to configure other monitors.

    7. Click OK to apply the settings.

    Please let me know if you have any questions.

    Thanks James

    February 14, 2011 at 11:31 pm #32153
    Anonymous
    Inactive

    JCHaldas,

    Thanks for the info because it helped me to change some camera positions, but the problem I'm having is with the control center, because the servers are in 9 different stores and I'm watching them remotely in 9 monitors here, next month we are having 3 more stores opening and we bought 3 more monitors so I'm trying to get the new servers to open on these 3 extra monitors we just installed, but instead they are all opening on my main monitor.

    February 15, 2011 at 8:16 pm #32154
    Mike Haldas
    Keymaster

    Philippe,

    Are the additional monitors activated in windows?

    February 19, 2011 at 7:26 pm #32155
    Anonymous
    Inactive

    JC, I found out how to change it, in case someone needs it in the future:

    1 – Go to the Control Center bar,

    2 – Click on Edit and then System Configure,

    3 – From the Matrix tab you can choose the exact position where the matrix screen will pop up when you turn the system on.

    Thank y'all.

    February 23, 2011 at 4:04 pm #32156
    Mike Haldas
    Keymaster

    Phiippe ,

    Thanks for the info.

    James

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.