VIDEO LOST WATCHDOG PROCESS TRY TO REEBOT SYSTEM

This topic is empty.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
August 5, 2011 at 4:36 pm #31288

Anonymous
Inactive

I have installed the GV-1480A, we formatted the computer and have reinstalled the entire system of Geovision version 8.3, including Windows XP 32-bit with version 8.3 of geovision with the correct driver. error: "VIDEO LOST WATCHDOG PROCESS TRY TO REEBOT SYSTEM" anyway repeats.

the application once you receive this message 10 seconds restarts.

the system is installed on a dell vostro 220 computer model, we have two identical computers with the same number of systems installed and geovision not have this error.

the system in the "Video Signal Diagnostic" only presents the option to "Disable Beep Video Lost."

I appreciate your help.

August 5, 2011 at 8:06 pm #32255

Mike Haldas
Keymaster

Hello Chonas,

Please see the following PDF

https://videos.cctvcamerapros.com/downloads/geovision/gvwatchdogreboot.pdf

This should fix your issue.

Thanks James

August 14, 2012 at 9:30 pm #32256

Anonymous
Inactive

Try this: (its on the manual)

Stopping Video Lost Watchdog

When the video signal is weak, the software watchdog will try to recover the lost video by restarting the system and even rebooting the computer. However, if the video lost watchdog feature is not required, now you have the option to disable it.

To disable this feature, click the Configure button, point to Video Signal Diagnostic, and select Disable Video Signal Weak Watchdog.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.