How to change the iDVR-E from NTSC to PAL

Home › Forums › Stand Alone DVR Support › iDVR-E Series › How to change the iDVR-E from NTSC to PAL

  • January 25, 2012 at 3:59 pm

    To change the iDVR-E video source from NTSC to PAL please follow below instructions.

    1.) Stop the Recording on the iDVR-E

    2.) Press and hold the up and 1 button on the front of the DVR for about 10 seconds.

    3.) Once prompted fill in your password.

    4.) Now scroll down to the "Video Mode" section and press the plus or minus button to toggle NTSC or PAL.

    5.) Press the enter button .

    You are now finished.