Missing remote screen icons

Home > CCTV Security Camera & Video Surveillance System Forums > JPEG2000 DVR Support > Missing remote screen icons

Tagged: , , , ,

This topic contains 3 replies, has 0 voices, and was last updated by  Anonymous 7 years, 10 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 7, 2011 at 11:41 am #31259

    Anonymous

    I am viewing 11 cameras remotely. I have all the icons on the upper left corner of the screen. I do not have a time stamp.

    I do not have any icons in the upper right corner of the screen. I can not see if it is recording. Where is the menu setting to adjust this?

    June 7, 2011 at 7:26 pm #32234

    Mike Haldas
    Keymaster

    Hello whs,

    Do you have a model # for the DVR you are using?

    Thanks James

    June 8, 2011 at 11:38 am #32235

    Anonymous

    It is a JPEG2000+H.264

    Thank you for your assistance.

    June 8, 2011 at 9:31 pm #32236

    Mike Haldas
    Keymaster

    The ICON setup and time stamp have to be setup on the physical DVR. It cannot be setup remotely. Unfortunately the JPEG DVR does not support this function. Once you setup the display setup within the DVR. You can see the icons and time stamp remotely.

    Thanks James

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.