HD Camera IR Reflection

This topic contains 0 replies, has 1 voice, and was last updated by  jimmy 8 months, 4 weeks ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #34344

    jimmy
    Participant

    If the IR LEDs are inside the dome lining the IR will bounce back and cause a glare. Take a look at the image below. You want the 4 IR LEDs on the outside of the lining. The lining prevents the LEDs from reflecting back into the lens.

    HD Camera IR Reflection

     

    If you are mounting the camera to a wall, you will need to re-position the IR panel. Refer to the image below. After removing the dome cover, the IR panel simply pulls off. You will wanted to re-position it so that the IR LEDs fit within the lining of the dome cover.

    IR LED Rings

     

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.